Maidaid
Maidaid Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher will not fill with water, cycle stops shortly after start and E1 is displayed.
Water Inlet Timeout / No Fill
E10
Dishwasher shows E10 and may not dose detergent or rinse aid correctly.
Detergent / Rinse Aid Dosing System Fault
E11
Dishwasher displays E11 and may not complete cycle; often linked to drain temperature or safety thermostat.
Overtemperature / Safety Thermostat Trip
E12
Dishwasher shows E12 and may not accept new cycles; often associated with internal leak detection or base tray water.
Leak Detected / Anti-Flood System Activated
E13
Dishwasher displays E13 and may not start; often linked to low incoming water pressure or supply issues.
Low Water Pressure / Supply Fault
E14
Dishwasher shows E14 and may stop during wash; often associated with turbidity or soil sensor issues on some Maidaid models.
Turbidity / Soil Sensor Fault
E15
Dishwasher displays E15 and may not heat or may abort; often related to booster pump or rinse system on some Maidaid models.
Rinse Pump / Booster Pump Fault
E2
Dishwasher overfills or water level too high in tank, may leak from door and E2 is displayed.
Overfill / Water Level Sensor Fault
E3
Dishwasher does not heat water, cycle runs cold and E3 is displayed.
Heating Circuit Failure
E4
Dishwasher stops mid-cycle, does not drain water, E4 is displayed and water remains in the tank.
Drain Pump Failure / Drain Timeout
E5
Dishwasher fills but wash arms do not rotate properly, poor wash performance and E5 is displayed.
Wash Pump / Circulation Pump Failure
E6
Dishwasher stops and displays E6, often accompanied by no water entering or immediate abort of cycle.
Flow Meter / Water Intake Sensor Error
E7
Dishwasher displays E7 and may stop heating or abort cycle; temperature readings appear incorrect.
Temperature Sensor (NTC) Fault
E8
Dishwasher shows E8 and may stop during rinse or final heat, often related to rinse aid or boiler level on certain Maidaid models.
Booster / Rinse Boiler Level or Temperature Fault
E9
Dishwasher displays E9 and may not start or may stop unexpectedly; often associated with door status.
Door Interlock / Door Switch Fault
Symptom
Dishes are not coming clean; food residues remain after the cycle.
Poor Wash Performance / Low Spray Pressure
Symptom
Dishwasher chemical dosing seems inconsistent; sometimes overdosing, sometimes underdosing.
Inconsistent Chemical Dosing
Symptom
Dishwasher cycles are too short and dishes are not properly washed or sanitised.
Program / Temperature Not Reached
Symptom
Dishwasher display works but some indicator lights or segments are missing or flickering.
Display / LED Fault
Symptom
Dishwasher door drops down quickly or will not stay partially open.
Door Spring / Cable Failure
Symptom
Dishwasher door is difficult to close or pops open during operation.
Door Latch / Hinge Misalignment
Symptom
Dishwasher drains immediately after filling, never reaching proper water level.
Siphoning / Incorrect Drain Hose Installation
Symptom
Dishwasher emits a bad smell, especially when first opened after standing.
Odour / Bacterial Growth
Symptom
Dishwasher fills and heats but does not drain at the end of the cycle; no error code shown.
Partial Drain Failure
Symptom
Dishwasher is very noisy during operation, with grinding or rattling sounds.
Mechanical Noise / Pump or Bearing Wear
Symptom
Dishwasher leaks from underneath or from the sides of the cabinet.
Internal Hose / Pump Seal Leak
Symptom
Dishwasher leaks water from the door area during wash.
Door Seal / Gasket Failure
Symptom
Dishwasher leaves a greasy film on dishes and inside the tank.
Insufficient Detergent / Low Wash Temperature
Symptom
Dishwasher leaves standing water in the bottom between cycles, even though it drains at the end.
Backflow from Sink / Check Valve Issue
Symptom
Dishwasher leaves white streaks or spots on glassware.
Rinse Aid / Water Hardness Issue
Symptom
Dishwasher occasionally stops mid-cycle without any error code; restarting resumes operation.
Intermittent Control / Overheat Protection
Symptom
Dishwasher powers on but will not start a cycle; start button unresponsive.
User Interface / Control Panel Fault
Symptom
Dishwasher racks are corroding or coating is peeling, leading to rust marks on dishes.
Rack Coating Degradation
Symptom
Dishwasher repeatedly trips the electrical breaker or RCD when starting or during heating.
Electrical Short / Earth Leakage
Symptom
Dishwasher runs but does not heat; cycles complete with cold water and poor drying.
No Heat / Heater Not Energising
Symptom
Dishwasher vibrates excessively or moves during operation.
Excessive Vibration / Installation Fault
Symptom
Dishwasher will not start; no lights or display.
No Power / Main Supply Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher will not fill with water, cycle stops shortly after start and E1 is displayed.
|
Water Inlet Timeout / No Fill | View Details |
| E10 |
Dishwasher shows E10 and may not dose detergent or rinse aid correctly.
|
Detergent / Rinse Aid Dosing System Fault | View Details |
| E11 |
Dishwasher displays E11 and may not complete cycle; often linked to drain temperature or safety thermostat.
|
Overtemperature / Safety Thermostat Trip | View Details |
| E12 |
Dishwasher shows E12 and may not accept new cycles; often associated with internal leak detection or base tray water.
|
Leak Detected / Anti-Flood System Activated | View Details |
| E13 |
Dishwasher displays E13 and may not start; often linked to low incoming water pressure or supply issues.
|
Low Water Pressure / Supply Fault | View Details |
| E14 |
Dishwasher shows E14 and may stop during wash; often associated with turbidity or soil sensor issues on some Maidaid models.
|
Turbidity / Soil Sensor Fault | View Details |
| E15 |
Dishwasher displays E15 and may not heat or may abort; often related to booster pump or rinse system on some Maidaid models.
|
Rinse Pump / Booster Pump Fault | View Details |
| E2 |
Dishwasher overfills or water level too high in tank, may leak from door and E2 is displayed.
|
Overfill / Water Level Sensor Fault | View Details |
| E3 |
Dishwasher does not heat water, cycle runs cold and E3 is displayed.
|
Heating Circuit Failure | View Details |
| E4 |
Dishwasher stops mid-cycle, does not drain water, E4 is displayed and water remains in the tank.
|
Drain Pump Failure / Drain Timeout | View Details |
| E5 |
Dishwasher fills but wash arms do not rotate properly, poor wash performance and E5 is displayed.
|
Wash Pump / Circulation Pump Failure | View Details |
| E6 |
Dishwasher stops and displays E6, often accompanied by no water entering or immediate abort of cycle.
|
Flow Meter / Water Intake Sensor Error | View Details |
| E7 |
Dishwasher displays E7 and may stop heating or abort cycle; temperature readings appear incorrect.
|
Temperature Sensor (NTC) Fault | View Details |
| E8 |
Dishwasher shows E8 and may stop during rinse or final heat, often related to rinse aid or boiler level on certain Maidaid models.
|
Booster / Rinse Boiler Level or Temperature Fault | View Details |
| E9 |
Dishwasher displays E9 and may not start or may stop unexpectedly; often associated with door status.
|
Door Interlock / Door Switch Fault | View Details |
| – |
Dishes are not coming clean; food residues remain after the cycle.
|
Poor Wash Performance / Low Spray Pressure | View Details |
| – |
Dishwasher chemical dosing seems inconsistent; sometimes overdosing, sometimes underdosing.
|
Inconsistent Chemical Dosing | View Details |
| – |
Dishwasher cycles are too short and dishes are not properly washed or sanitised.
|
Program / Temperature Not Reached | View Details |
| – |
Dishwasher display works but some indicator lights or segments are missing or flickering.
|
Display / LED Fault | View Details |
| – |
Dishwasher door drops down quickly or will not stay partially open.
|
Door Spring / Cable Failure | View Details |
| – |
Dishwasher door is difficult to close or pops open during operation.
|
Door Latch / Hinge Misalignment | View Details |
| – |
Dishwasher drains immediately after filling, never reaching proper water level.
|
Siphoning / Incorrect Drain Hose Installation | View Details |
| – |
Dishwasher emits a bad smell, especially when first opened after standing.
|
Odour / Bacterial Growth | View Details |
| – |
Dishwasher fills and heats but does not drain at the end of the cycle; no error code shown.
|
Partial Drain Failure | View Details |
| – |
Dishwasher is very noisy during operation, with grinding or rattling sounds.
|
Mechanical Noise / Pump or Bearing Wear | View Details |
| – |
Dishwasher leaks from underneath or from the sides of the cabinet.
|
Internal Hose / Pump Seal Leak | View Details |
| – |
Dishwasher leaks water from the door area during wash.
|
Door Seal / Gasket Failure | View Details |
| – |
Dishwasher leaves a greasy film on dishes and inside the tank.
|
Insufficient Detergent / Low Wash Temperature | View Details |
| – |
Dishwasher leaves standing water in the bottom between cycles, even though it drains at the end.
|
Backflow from Sink / Check Valve Issue | View Details |
| – |
Dishwasher leaves white streaks or spots on glassware.
|
Rinse Aid / Water Hardness Issue | View Details |
| – |
Dishwasher occasionally stops mid-cycle without any error code; restarting resumes operation.
|
Intermittent Control / Overheat Protection | View Details |
| – |
Dishwasher powers on but will not start a cycle; start button unresponsive.
|
User Interface / Control Panel Fault | View Details |
| – |
Dishwasher racks are corroding or coating is peeling, leading to rust marks on dishes.
|
Rack Coating Degradation | View Details |
| – |
Dishwasher repeatedly trips the electrical breaker or RCD when starting or during heating.
|
Electrical Short / Earth Leakage | View Details |
| – |
Dishwasher runs but does not heat; cycles complete with cold water and poor drying.
|
No Heat / Heater Not Energising | View Details |
| – |
Dishwasher vibrates excessively or moves during operation.
|
Excessive Vibration / Installation Fault | View Details |
| – |
Dishwasher will not start; no lights or display.
|
No Power / Main Supply Fault | View Details |
No matching codes found
Advertisements