Maidaid Partial Drain Failure

Dishwasher fills and heats but does not drain at the end of the cycle; no error code shown.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Partially blocked Maidaid drain pump, Obstructed drain hose, Blocked sink trap spigot, Weak drain pump motor

Safety first: Disconnect power and be cautious of hot water.

Clean filters: Remove and clean the Maidaid tank filter to ensure good flow to the pump.
Inspect pump: Access the drain pump and check for debris around the impeller. Remove any obstructions.
Check hose and sink trap: Detach the drain hose from the sink trap and clear any blockages. Clean the spigot thoroughly.
Test pump output: Run a drain cycle and observe the flow into a bucket (temporarily). If weak, replace the Maidaid drain pump.

Medium 3/5

Maidaid Drain Pump

Check Price on Amazon

We may earn a commission from links on this page.