How to Fix / Troubleshooting

Safety first: Disconnect power and close the water supply. Allow hot water to cool before working.

Remove panels: Take off the front kick panel and side panels to gain a clear view of the internal plumbing.
Run a brief test: Restore power temporarily and run a short fill/wash while observing for drips. Then isolate power again.
Identify leak source: Trace water trails back to the highest wet point. Common sources are Maidaid pump seals, hose joints, and tank gaskets.
Tighten or replace: Tighten hose clamps, replace cracked hoses, and if the pump seal is leaking, replace the Maidaid wash pump or fit a new seal kit if available.
Dry base tray: Sponge out any water from the base tray and ensure any float switches move freely.

Dishwasher leaks from underneath or from the sides of the cabinet.

Possible Causes