Midea
Circulation Pump Not Running
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed Midea circulation pump motor, Jammed pump impeller, Loose pump wiring connector, Faulty main control board output
How to Fix / Troubleshooting
Safety first: Turn off power and water before accessing the base.
- Listen during wash: After filling, you should hear a strong motor sound and water spraying. If you only hear a low hum or silence, the pump is suspect.
- Check for obstructions: Remove filters and inspect the sump for foreign objects that could jam the impeller.
- Access pump: From the bottom, remove the Midea circulation pump and inspect the impeller. Clear debris and ensure it spins freely.
- Replace pump: If the motor is seized or burned, install a new Midea wash circulation pump.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Midea Wash Circulation Pump
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements