Midea Dishwashers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Dishwasher stops mid-cycle and displays E1; machine may attempt to drain continuously and then shut off.
Water Inlet Timeout / Insufficient Fill
E10
Dishwasher displays E10; machine may not start or may stop shortly after starting, often with no water movement.
Main Control Board Communication / Internal Error
E11
Dishwasher shows E11; unit may not detect door status correctly, sometimes starting with door open or refusing to start when closed.
Door Lock / Door Switch Fault
E12
Dishwasher displays E12; often associated with poor heating or drying and may occur intermittently.
NTC Temperature Sensor Fault
E13
Dishwasher shows E13; unit may overheat water or shut down during heating phase.
Overheating / Temperature Out of Range
E14
Dishwasher displays E14; water level readings appear inconsistent, sometimes filling too little or too much.
Flow Meter / Water Intake Sensor Fault
E15
Dishwasher shows E15; unit may not fill and the drain pump may run continuously.
Leak Detected in Base / Anti-Flood Protection Activated
E16
Dishwasher displays E16; often related to abnormal water inlet behavior, sometimes continuous filling.
Water Inlet Overflow / Valve Stuck Open
E17
Dishwasher shows E17; may indicate a problem with the door or safety interlock, preventing operation.
Child Lock / Safety Interlock Error
E2
Dishwasher displays E2 and stops; cycle may end early with dishes still dirty and some water left in the tub.
Abnormal Water Level / Overfill or Underfill Detection
E21
Dishwasher displays E21; often associated with drain pump issues or blocked drainage.
Drain Pump Electrical / Mechanical Fault
E24
Dishwasher shows E24; unit may not drain properly and may stop with water in the bottom.
Drain Hose / Outlet Blockage
E25
Dishwasher displays E25; often accompanied by loud humming from the drain area and standing water.
Drain Pump Blocked / Cover Not Seated
E3
Dishwasher shows E3; water fills but does not heat properly, and dishes come out cold and wet.
Heating Circuit Failure / Water Not Reaching Target Temperature
E30
Dishwasher shows E30; unit may not start and may indicate a generic system error.
General System / Sensor Error
E4
Dishwasher displays E4 and may stop filling; sometimes accompanied by water remaining in the tub or poor wash performance.
Water Flow / Circulation Fault
E5
Dishwasher shows E5 and stops; water may remain in the tub and the machine may not advance to the next stage.
Drain Timeout / Drainage Failure
E6
Dishwasher displays E6; cycle may not start or may stop shortly after starting, sometimes with no water entering.
Water Inlet Valve Electrical Fault
E7
Dishwasher shows E7; unit may fill but not wash, or may stop with little activity after filling.
Circulation Pump Electrical Fault
E8
Dishwasher displays E8; drying performance is poor and dishes remain wet at the end of the cycle.
Drying System / Fan or Heater Fault
E9
Dishwasher shows E9; unit may stop during wash or rinse, sometimes with unusual noises from the pump area.
Sump / Diverter Valve Fault
F1
Dishwasher displays F1; unit may not start or may stop shortly after starting.
Water Supply Fault / Low Pressure
F2
Dishwasher shows F2; unit may not drain or may stop with water in the tub.
Drain Fault
F3
Dishwasher displays F3; water does not heat and cycles may run unusually long.
Heating Fault
F4
Dishwasher shows F4; may indicate a water level or overflow issue.
Water Level / Overflow Fault
F5
Dishwasher displays F5; spray arms may not rotate and cleaning is poor.
Circulation Pump / Spray System Fault
F6
Dishwasher shows F6; may not detect water correctly, leading to fill or drain anomalies.
Water Intake / Flow Sensor Fault
F7
Dishwasher displays F7; may indicate a heating or temperature sensor issue during drying.
Drying Heater / Temperature Fault
F8
Dishwasher shows F8; may be related to turbidity or soil sensor issues affecting cycle length.
Turbidity / Soil Sensor Fault
F9
Dishwasher displays F9; may indicate a diverter or spray distribution problem.
Diverter Position Fault
Symptom
Control panel buttons are unresponsive or respond intermittently.
User Interface / Touch Panel Fault
Symptom
Detergent tablet or powder remains in the dispenser at the end of the cycle.
Detergent Dispenser Not Opening / Poor Water Reach
Symptom
Dishes are not getting clean; food remains stuck on after a full cycle.
Poor Wash Performance
Symptom
Dishes come out wet; poor drying performance even on heated dry cycles.
Poor Drying / Condensation Issue
Symptom
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom.
Poor Drainage / Standing Water
Symptom
Dishwasher door drops open too quickly or will not stay partially open.
Door Spring / Cable Failure
Symptom
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
Circulation Pump Not Running
Symptom
Dishwasher leaks water from the front bottom of the door during operation.
Door Seal / Splash Leak
Symptom
Dishwasher leaks water from underneath the unit onto the floor.
Base Leak / Internal Hose or Sump Leak
Symptom
Dishwasher makes a high-pitched squealing or whining noise during operation.
Pump or Motor Bearing Wear
Symptom
Dishwasher makes loud grinding or rattling noises during wash or drain.
Foreign Object in Pump or Spray System
Symptom
Dishwasher powers on but will not start a cycle; pressing Start does nothing or only beeps.
Start Inhibit / Door or User Interface Fault
Symptom
Dishwasher vibrates excessively or moves during operation, especially during drain or wash.
Excessive Vibration / Installation Issue
Symptom
Dishwasher will not power on at all; no lights on the control panel and no response to any buttons.
No Power / Dead Control
Symptom
Rust spots appearing on the interior of the dishwasher or on racks.
Corrosion / Coating Failure
Symptom
Steam or moisture condenses heavily on surrounding cabinets or countertop during or after cycles.
Ventilation / Door Seal Issue
Symptom
Top rack dishes remain dirty while bottom rack cleans normally.
Upper Spray Arm / Feed Tube Issue
Symptom
Unpleasant odor coming from the dishwasher, especially when opening the door after it has been closed for a while.
Odor / Bacterial Growth
Symptom
Water remains in the bottom of the dishwasher between cycles, slowly seeping back after draining.
Backflow from Sink / Improper Drain Hose Installation
Symptom
White film or cloudy residue on dishes and glassware after washing.
Hard Water Deposits / Poor Rinse
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Dishwasher stops mid-cycle and displays E1; machine may attempt to drain continuously and then shut off.
|
Water Inlet Timeout / Insufficient Fill | View Details |
| E10 |
Dishwasher displays E10; machine may not start or may stop shortly after starting, often with no water movement.
|
Main Control Board Communication / Internal Error | View Details |
| E11 |
Dishwasher shows E11; unit may not detect door status correctly, sometimes starting with door open or refusing to start when closed.
|
Door Lock / Door Switch Fault | View Details |
| E12 |
Dishwasher displays E12; often associated with poor heating or drying and may occur intermittently.
|
NTC Temperature Sensor Fault | View Details |
| E13 |
Dishwasher shows E13; unit may overheat water or shut down during heating phase.
|
Overheating / Temperature Out of Range | View Details |
| E14 |
Dishwasher displays E14; water level readings appear inconsistent, sometimes filling too little or too much.
|
Flow Meter / Water Intake Sensor Fault | View Details |
| E15 |
Dishwasher shows E15; unit may not fill and the drain pump may run continuously.
|
Leak Detected in Base / Anti-Flood Protection Activated | View Details |
| E16 |
Dishwasher displays E16; often related to abnormal water inlet behavior, sometimes continuous filling.
|
Water Inlet Overflow / Valve Stuck Open | View Details |
| E17 |
Dishwasher shows E17; may indicate a problem with the door or safety interlock, preventing operation.
|
Child Lock / Safety Interlock Error | View Details |
| E2 |
Dishwasher displays E2 and stops; cycle may end early with dishes still dirty and some water left in the tub.
|
Abnormal Water Level / Overfill or Underfill Detection | View Details |
| E21 |
Dishwasher displays E21; often associated with drain pump issues or blocked drainage.
|
Drain Pump Electrical / Mechanical Fault | View Details |
| E24 |
Dishwasher shows E24; unit may not drain properly and may stop with water in the bottom.
|
Drain Hose / Outlet Blockage | View Details |
| E25 |
Dishwasher displays E25; often accompanied by loud humming from the drain area and standing water.
|
Drain Pump Blocked / Cover Not Seated | View Details |
| E3 |
Dishwasher shows E3; water fills but does not heat properly, and dishes come out cold and wet.
|
Heating Circuit Failure / Water Not Reaching Target Temperature | View Details |
| E30 |
Dishwasher shows E30; unit may not start and may indicate a generic system error.
|
General System / Sensor Error | View Details |
| E4 |
Dishwasher displays E4 and may stop filling; sometimes accompanied by water remaining in the tub or poor wash performance.
|
Water Flow / Circulation Fault | View Details |
| E5 |
Dishwasher shows E5 and stops; water may remain in the tub and the machine may not advance to the next stage.
|
Drain Timeout / Drainage Failure | View Details |
| E6 |
Dishwasher displays E6; cycle may not start or may stop shortly after starting, sometimes with no water entering.
|
Water Inlet Valve Electrical Fault | View Details |
| E7 |
Dishwasher shows E7; unit may fill but not wash, or may stop with little activity after filling.
|
Circulation Pump Electrical Fault | View Details |
| E8 |
Dishwasher displays E8; drying performance is poor and dishes remain wet at the end of the cycle.
|
Drying System / Fan or Heater Fault | View Details |
| E9 |
Dishwasher shows E9; unit may stop during wash or rinse, sometimes with unusual noises from the pump area.
|
Sump / Diverter Valve Fault | View Details |
| F1 |
Dishwasher displays F1; unit may not start or may stop shortly after starting.
|
Water Supply Fault / Low Pressure | View Details |
| F2 |
Dishwasher shows F2; unit may not drain or may stop with water in the tub.
|
Drain Fault | View Details |
| F3 |
Dishwasher displays F3; water does not heat and cycles may run unusually long.
|
Heating Fault | View Details |
| F4 |
Dishwasher shows F4; may indicate a water level or overflow issue.
|
Water Level / Overflow Fault | View Details |
| F5 |
Dishwasher displays F5; spray arms may not rotate and cleaning is poor.
|
Circulation Pump / Spray System Fault | View Details |
| F6 |
Dishwasher shows F6; may not detect water correctly, leading to fill or drain anomalies.
|
Water Intake / Flow Sensor Fault | View Details |
| F7 |
Dishwasher displays F7; may indicate a heating or temperature sensor issue during drying.
|
Drying Heater / Temperature Fault | View Details |
| F8 |
Dishwasher shows F8; may be related to turbidity or soil sensor issues affecting cycle length.
|
Turbidity / Soil Sensor Fault | View Details |
| F9 |
Dishwasher displays F9; may indicate a diverter or spray distribution problem.
|
Diverter Position Fault | View Details |
| – |
Control panel buttons are unresponsive or respond intermittently.
|
User Interface / Touch Panel Fault | View Details |
| – |
Detergent tablet or powder remains in the dispenser at the end of the cycle.
|
Detergent Dispenser Not Opening / Poor Water Reach | View Details |
| – |
Dishes are not getting clean; food remains stuck on after a full cycle.
|
Poor Wash Performance | View Details |
| – |
Dishes come out wet; poor drying performance even on heated dry cycles.
|
Poor Drying / Condensation Issue | View Details |
| – |
Dishwasher does not drain at the end of the cycle; standing water remains in the bottom.
|
Poor Drainage / Standing Water | View Details |
| – |
Dishwasher door drops open too quickly or will not stay partially open.
|
Door Spring / Cable Failure | View Details |
| – |
Dishwasher fills with water but does not wash; spray arms do not move and dishes remain dirty.
|
Circulation Pump Not Running | View Details |
| – |
Dishwasher leaks water from the front bottom of the door during operation.
|
Door Seal / Splash Leak | View Details |
| – |
Dishwasher leaks water from underneath the unit onto the floor.
|
Base Leak / Internal Hose or Sump Leak | View Details |
| – |
Dishwasher makes a high-pitched squealing or whining noise during operation.
|
Pump or Motor Bearing Wear | View Details |
| – |
Dishwasher makes loud grinding or rattling noises during wash or drain.
|
Foreign Object in Pump or Spray System | View Details |
| – |
Dishwasher powers on but will not start a cycle; pressing Start does nothing or only beeps.
|
Start Inhibit / Door or User Interface Fault | View Details |
| – |
Dishwasher vibrates excessively or moves during operation, especially during drain or wash.
|
Excessive Vibration / Installation Issue | View Details |
| – |
Dishwasher will not power on at all; no lights on the control panel and no response to any buttons.
|
No Power / Dead Control | View Details |
| – |
Rust spots appearing on the interior of the dishwasher or on racks.
|
Corrosion / Coating Failure | View Details |
| – |
Steam or moisture condenses heavily on surrounding cabinets or countertop during or after cycles.
|
Ventilation / Door Seal Issue | View Details |
| – |
Top rack dishes remain dirty while bottom rack cleans normally.
|
Upper Spray Arm / Feed Tube Issue | View Details |
| – |
Unpleasant odor coming from the dishwasher, especially when opening the door after it has been closed for a while.
|
Odor / Bacterial Growth | View Details |
| – |
Water remains in the bottom of the dishwasher between cycles, slowly seeping back after draining.
|
Backflow from Sink / Improper Drain Hose Installation | View Details |
| – |
White film or cloudy residue on dishes and glassware after washing.
|
Hard Water Deposits / Poor Rinse | View Details |
No matching codes found
Advertisements