Midea Base Leak / Internal Hose or Sump Leak

Dishwasher leaks water from underneath the unit onto the floor.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose hose clamp on circulation or drain hose, Cracked Midea sump or tub, Leaking inlet valve connection, Worn pump seal

How to Fix / Troubleshooting

Safety first: Immediately disconnect power and turn off water to prevent damage and electrical hazards.

  • Remove kick panel: Inspect the base area with a flashlight while running a short fill test (use caution).
  • Identify leak source: Look for drips from hoses, pumps, sump gasket, or inlet valve. Dry the area and repeat if necessary to pinpoint the source.
  • Tighten and replace: Tighten loose clamps, replace cracked hoses, and install a new Midea sump gasket or pump seal if leaking.
  • Cracked tub: If the plastic tub is cracked, consult a technician; tub replacement may be required.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Midea Sump Assembly / Internal Hoses
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements