Midea
No Power / Dead Control
Dishwasher will not power on at all; no lights on the control panel and no response to any buttons.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped circuit breaker, Loose power connection at terminal block, Faulty Midea power cord, Failed main control board
How to Fix / Troubleshooting
Safety first: Before opening any panels, ensure the dishwasher is unplugged or the breaker is off.
- Check household power: Verify the kitchen circuit breaker is not tripped. Reset if necessary.
- Inspect outlet and cord: If the dishwasher uses a plug, test the outlet with another appliance. Replace a damaged Midea power cord.
- Terminal block: Remove the lower kick panel and access the terminal block. Tighten any loose wire connections and look for burn marks.
- Control board: If power is present at the terminal block but the control panel is dead, the main PCB or user interface may be faulty and should be replaced by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Midea Power Cord / Terminal Block Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements