Asko User Interface Input Failure

Dryer powers on but Start button does nothing; display may show normal time but no response.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Defective start button, Damaged control panel overlay, Loose UI ribbon cable, Faulty user interface PCB

Safety first: Unplug the dryer.

Steps:

Check child lock: Ensure any child lock feature is disabled (refer to user manual).
Inspect UI connections: Remove the control panel and reseat the ribbon cable between the UI and main board.
Button test: With the panel removed, press the start button and feel for a positive click. If the switch is physically damaged, replace the UI board or switch assembly.

Medium 3/5

User Interface Board

Check Price on Amazon

We may earn a commission from links on this page.