Balay
User Interface / Keypad Fault
Dryer control panel buttons are unresponsive or intermittent
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or damaged membrane switches, Moisture ingress into control panel, Loose ribbon cable, Faulty user interface PCB
How to Fix / Troubleshooting
Safety first: Disconnect mains power before removing the control panel.
Steps to check and fix:
- Inspect for moisture: Look for signs of condensation or liquid spills around the control panel. Dry thoroughly.
- Check ribbon cable: Reseat the ribbon cable between the user interface and main PCB. Inspect for cracks or damage.
- Test buttons: With the panel removed, test each switch with a multimeter. Replace the keypad or entire user interface board if switches are faulty.
- Reassemble and test: After repairs, reassemble and verify all buttons respond correctly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements