Balay Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dryer will not start; display shows E01 and the door symbol may flash
Door Lock / Door Switch Fault
E02
Dryer stops shortly after start or will not start; E02 displayed
Moisture Sensor / Humidity Detection Fault
E03
Dryer does not heat or stops with E03 on the display
Heating Circuit Fault (Heater / NTC / Thermal Cut-out)
E04
Dryer stops mid-cycle with E04; poor or no water collection in condenser tank
Condensate Pump / Drain System Fault
E05
Dryer stops or will not start; E05 displayed, often related to overheating or airflow issues
Airflow / Overtemperature Protection Fault
E06
Dryer does not heat correctly or stops with E06; may show erratic temperature behaviour
NTC Temperature Sensor Fault (Drum / Exhaust)
E07
Dryer drum does not rotate; E07 displayed shortly after start
Drive Motor / Belt / Motor Control Fault
E08
Dryer stops with E08; often associated with fan or airflow motor issues
Blower Fan / Fan Motor Fault
E09
Heat pump dryer does not heat; E09 displayed
Heat Pump Compressor / Inverter Fault
E10
Dryer shows E10 and may not start or may stop unexpectedly; often linked to communication issues
Control Module Communication / Internal Electronics Fault
E11
Dryer displays E11; may be associated with door locking/unlocking anomalies
Door Lock Feedback / Door Unlock Fault
E12
Dryer shows E12; often related to sensor system or program logic errors
Program Logic / Sensor System General Fault
E13
Dryer displays E13; may be associated with excessive moisture in base or leak detection
Leak / Water Level Sensor Fault (Condenser / Heat Pump Models)
E14
Dryer shows E14; often associated with humidity or ambient temperature sensor issues on some models
Ambient / Additional Temperature Sensor Fault
E15
Dryer displays E15; may be related to power supply or internal voltage monitoring
Internal Power Supply / Overvoltage-Undervoltage Fault
E16
Dryer shows E16; may be associated with door open detection during cycle
Door Open Detection Fault
E17
Dryer displays E17; may be related to drum speed sensing or motor tachometer
Motor Tachometer / Speed Sensor Fault
E18
Dryer shows E18; may be associated with blocked condenser or airflow sensor on some models
Condenser Airflow / Pressure Sensor Fault
E19
Dryer displays E19; may be related to water tank level detection
Water Tank Full Sensor / Level Switch Fault
E20
Dryer shows E20; may be associated with internal memory or configuration error
Configuration / EEPROM Fault
Symptom
Dryer control panel buttons are unresponsive or intermittent
User Interface / Keypad Fault
Symptom
Dryer display and lights work but drum and motor do not run
Motor Start / Drive Circuit Fault
Symptom
Dryer display is dim, flickering, or partially unreadable
Display Module / Backlight Fault
Symptom
Dryer does not start at all; no lights or display
No Power / Dead Appliance
Symptom
Dryer door seal is damaged or clothes get caught at the door opening
Door Gasket / Drum Front Seal Fault
Symptom
Dryer door will not stay closed or pops open during cycle
Door Latch / Catch Fault
Symptom
Dryer drum does not turn but motor can be heard humming
Drive Belt / Drum Support Fault
Symptom
Dryer emits a burning smell during operation
Overheating / Foreign Object on Heater
Symptom
Dryer has a musty or mouldy smell inside the drum and on clothes
Odour / Microbial Growth in Condenser and Air Ducts
Symptom
Dryer leaks water onto the floor during or after operation
Water Leak / Condensate Handling Fault
Symptom
Dryer makes loud banging or thumping noises during operation
Drum Support / Suspension Fault
Symptom
Dryer occasionally trips the household circuit breaker or RCD
Electrical Leakage / Short Circuit
Symptom
Dryer powers on but will not start when Start button is pressed
Start Circuit / User Interface Fault
Symptom
Dryer produces a high-pitched squealing or squeaking noise
Friction in Drum Support or Idler Pulley
Symptom
Dryer runs but clothes remain wet or only slightly warm at the end of the cycle
No Heat / Insufficient Heating
Symptom
Dryer runs but takes much longer than usual to dry clothes
Reduced Drying Efficiency / Restricted Airflow
Symptom
Dryer runs but there is no drum light (on models with internal light)
Drum Light Circuit Fault
Symptom
Dryer stops mid-cycle and will not resume until cooled down
Thermal Overload / Overheating Protection
Symptom
Dryer stops with water tank full indicator even when tank is empty
False Water Tank Full Indication
Symptom
Dryer vibrates excessively or moves across the floor during operation
Imbalance / Mechanical Vibration Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dryer will not start; display shows E01 and the door symbol may flash
|
Door Lock / Door Switch Fault | View Details |
| E02 |
Dryer stops shortly after start or will not start; E02 displayed
|
Moisture Sensor / Humidity Detection Fault | View Details |
| E03 |
Dryer does not heat or stops with E03 on the display
|
Heating Circuit Fault (Heater / NTC / Thermal Cut-out) | View Details |
| E04 |
Dryer stops mid-cycle with E04; poor or no water collection in condenser tank
|
Condensate Pump / Drain System Fault | View Details |
| E05 |
Dryer stops or will not start; E05 displayed, often related to overheating or airflow issues
|
Airflow / Overtemperature Protection Fault | View Details |
| E06 |
Dryer does not heat correctly or stops with E06; may show erratic temperature behaviour
|
NTC Temperature Sensor Fault (Drum / Exhaust) | View Details |
| E07 |
Dryer drum does not rotate; E07 displayed shortly after start
|
Drive Motor / Belt / Motor Control Fault | View Details |
| E08 |
Dryer stops with E08; often associated with fan or airflow motor issues
|
Blower Fan / Fan Motor Fault | View Details |
| E09 |
Heat pump dryer does not heat; E09 displayed
|
Heat Pump Compressor / Inverter Fault | View Details |
| E10 |
Dryer shows E10 and may not start or may stop unexpectedly; often linked to communication issues
|
Control Module Communication / Internal Electronics Fault | View Details |
| E11 |
Dryer displays E11; may be associated with door locking/unlocking anomalies
|
Door Lock Feedback / Door Unlock Fault | View Details |
| E12 |
Dryer shows E12; often related to sensor system or program logic errors
|
Program Logic / Sensor System General Fault | View Details |
| E13 |
Dryer displays E13; may be associated with excessive moisture in base or leak detection
|
Leak / Water Level Sensor Fault (Condenser / Heat Pump Models) | View Details |
| E14 |
Dryer shows E14; often associated with humidity or ambient temperature sensor issues on some models
|
Ambient / Additional Temperature Sensor Fault | View Details |
| E15 |
Dryer displays E15; may be related to power supply or internal voltage monitoring
|
Internal Power Supply / Overvoltage-Undervoltage Fault | View Details |
| E16 |
Dryer shows E16; may be associated with door open detection during cycle
|
Door Open Detection Fault | View Details |
| E17 |
Dryer displays E17; may be related to drum speed sensing or motor tachometer
|
Motor Tachometer / Speed Sensor Fault | View Details |
| E18 |
Dryer shows E18; may be associated with blocked condenser or airflow sensor on some models
|
Condenser Airflow / Pressure Sensor Fault | View Details |
| E19 |
Dryer displays E19; may be related to water tank level detection
|
Water Tank Full Sensor / Level Switch Fault | View Details |
| E20 |
Dryer shows E20; may be associated with internal memory or configuration error
|
Configuration / EEPROM Fault | View Details |
| – |
Dryer control panel buttons are unresponsive or intermittent
|
User Interface / Keypad Fault | View Details |
| – |
Dryer display and lights work but drum and motor do not run
|
Motor Start / Drive Circuit Fault | View Details |
| – |
Dryer display is dim, flickering, or partially unreadable
|
Display Module / Backlight Fault | View Details |
| – |
Dryer does not start at all; no lights or display
|
No Power / Dead Appliance | View Details |
| – |
Dryer door seal is damaged or clothes get caught at the door opening
|
Door Gasket / Drum Front Seal Fault | View Details |
| – |
Dryer door will not stay closed or pops open during cycle
|
Door Latch / Catch Fault | View Details |
| – |
Dryer drum does not turn but motor can be heard humming
|
Drive Belt / Drum Support Fault | View Details |
| – |
Dryer emits a burning smell during operation
|
Overheating / Foreign Object on Heater | View Details |
| – |
Dryer has a musty or mouldy smell inside the drum and on clothes
|
Odour / Microbial Growth in Condenser and Air Ducts | View Details |
| – |
Dryer leaks water onto the floor during or after operation
|
Water Leak / Condensate Handling Fault | View Details |
| – |
Dryer makes loud banging or thumping noises during operation
|
Drum Support / Suspension Fault | View Details |
| – |
Dryer occasionally trips the household circuit breaker or RCD
|
Electrical Leakage / Short Circuit | View Details |
| – |
Dryer powers on but will not start when Start button is pressed
|
Start Circuit / User Interface Fault | View Details |
| – |
Dryer produces a high-pitched squealing or squeaking noise
|
Friction in Drum Support or Idler Pulley | View Details |
| – |
Dryer runs but clothes remain wet or only slightly warm at the end of the cycle
|
No Heat / Insufficient Heating | View Details |
| – |
Dryer runs but takes much longer than usual to dry clothes
|
Reduced Drying Efficiency / Restricted Airflow | View Details |
| – |
Dryer runs but there is no drum light (on models with internal light)
|
Drum Light Circuit Fault | View Details |
| – |
Dryer stops mid-cycle and will not resume until cooled down
|
Thermal Overload / Overheating Protection | View Details |
| – |
Dryer stops with water tank full indicator even when tank is empty
|
False Water Tank Full Indication | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation
|
Imbalance / Mechanical Vibration Fault | View Details |
No matching codes found
Advertisements