Balay Display Module / Backlight Fault

Dryer display is dim, flickering, or partially unreadable

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging or failed LED/LCD display, Loose display connector, Faulty display driver on user interface PCB, Power supply instability to display

Safety first: Unplug the dryer before accessing the control panel.

Steps to check and fix:

Check connectors: Remove the control panel and reseat the display connector.
Inspect for damage: Look for burnt components or corrosion on the display board.
Test supply voltage: If qualified, measure the supply voltage to the display. If unstable, suspect the main or UI board.
Replace display/UI board: If the display itself is defective, replace the display module or entire user interface board as supplied by Balay.

Medium 3/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.