Beko Intermittent Power / Loose Connection

Dryer display and lights flicker or reset during operation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose mains plug or socket, Loose internal terminal block connections, Failing main PCB power supply, Faulty on/off switch

Safety first: Unplug the dryer before inspecting internal connections.

Check plug and socket: Ensure the plug fits firmly in the outlet and that the outlet is not worn or loose.
Inspect terminal block: Tighten all screws on the internal mains terminal block and look for signs of overheating.
Check on/off switch: If fitted, test the mains switch for intermittent contact and replace if faulty.
Examine PCB: Look for cracked solder joints or loose connectors on the main board. Re-solder or replace the board as needed.

Medium 3/5

Mains Terminal Block

Check Price on Amazon

We may earn a commission from links on this page.