Beko Drum Bearing / Motor Bearing Wear

Dryer produces a low rumbling or grinding noise that gets worse over time.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn rear drum bearing, Worn front drum felt seals, Failing motor bearings, Debris in blower fan

Safety first: Unplug the dryer before inspection.

Check drum end play: Push and pull the drum front-to-back. Excessive movement or grinding suggests bearing wear.
Inspect rear bearing: Access the rear of the drum and examine the bearing or support. Replace if visibly worn or noisy.
Front felt seals: Inspect the front drum felt for wear or detachment. Replace if frayed or missing.
Motor and blower: Spin the motor shaft and blower fan by hand. If rough or noisy, the motor may need replacement and the blower cleaned.

Hard 4/5

Rear Drum Bearing Kit

Check Price on Amazon

We may earn a commission from links on this page.