Beko
No Power / Dead Appliance
Dryer will not start at all; no lights or display, completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown mains fuse, Faulty power cord, Loose connection at mains terminal block, Failed main control board power supply
How to Fix / Troubleshooting
Safety first: Ensure the dryer is unplugged before opening any covers. Only work on live circuits if you are qualified.
- Check outlet and fuse: Test the wall socket with another appliance. Check and replace the plug fuse (UK) with the correct rating if blown.
- Inspect power cord: Look for cuts, kinks, or burn marks. Replace the cord if damaged.
- Check internal terminal block: Remove the rear cover over the mains terminal. Tighten any loose screws and look for heat damage.
- Examine main PCB: If the supply to the board is present but there is no response, the PCB's power supply section may have failed and the board will need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements