E14
Beko
Blower Fan / Airflow Monitoring Fault
Dryer shows E14; often associated with fan or airflow monitoring on some models.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked blower housing with lint, Broken or loose fan wheel, Failed fan motor (if separate from main motor), Faulty airflow or pressure sensor
How to Fix / Troubleshooting
Safety first: Unplug the dryer. Sharp metal edges inside the cabinet can cause injury; wear gloves.
- Clean lint filter and ducts: Remove and clean the lint filter. Inspect internal ducts for heavy lint build-up and clean thoroughly.
- Access blower assembly: Remove the rear or side panel to reach the blower housing. Check that the fan wheel is firmly attached to the shaft and free of obstructions.
- Check fan motor (if separate): On some models, a dedicated fan motor is used. Test for power and continuity; replace if not running.
- Inspect airflow sensor: If fitted, check the wiring to any pressure or airflow sensor and ensure it is not blocked.
- Reassemble and test: After cleaning and securing the fan, run a test cycle to see if E14 clears.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Blower Fan Wheel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements