Belling User Interface Button / PCB Fault

Dryer control panel buttons are unresponsive or some buttons do not work.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn or damaged tact switches, Cracked PCB tracks, Loose ribbon cable between UI and main board, Liquid ingress into control panel

How to Fix / Troubleshooting

Safety first: Disconnect from mains before removing the control panel.

Inspection:

  • Remove the control fascia to access the user interface PCB.
  • Check for signs of moisture, corrosion, or burnt components.
  • Ensure the ribbon cable to the main PCB is firmly seated.

Repair:

  • If individual tact switches are faulty and you have soldering skills, they can sometimes be replaced.
  • Otherwise, replace the entire user interface PCB with the correct Belling part.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

User Interface PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements