Belling Dryers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Dryer will not start; display shows E01 and cycle will not begin when Start/Pause is pressed.
Door Interlock Circuit Fault
E02
Dryer stops shortly after starting or will not start; E02 displayed indicating a heating problem.
Heater Circuit Failure
E03
Dryer runs but clothes remain wet and cool; E03 displayed indicating a temperature sensing issue.
NTC Temperature Sensor Fault
E04
Dryer stops mid-cycle and displays E04; may be accompanied by very hot cabinet or drum.
Overheating / Airflow Restriction Fault
E05
Dryer will not start or stops shortly after starting; E05 displayed, often on condenser models with water tank.
Water Tank Full / Condensate Pump Fault
E06
Dryer drum does not rotate; motor hums or stops and E06 is displayed.
Drum Motor / Drive Circuit Fault
E07
Dryer stops and displays E07; may occur shortly after starting, often on condenser models.
Moisture Sensor / Dryness Detection Fault
E08
Dryer displays E08 and may not heat correctly; often associated with fan or airflow sensor issues.
Fan Motor / Airflow Monitoring Fault
E09
Dryer will not start or stops unexpectedly; E09 displayed indicating a control board or power issue.
Main Control PCB Power Supply Fault
E10
Dryer shows E10 and may not respond to button presses or may behave erratically.
User Interface / Communication Fault
E11
Dryer displays E11 and may stop heating or terminate cycles prematurely, particularly on sensor-dry programs.
Humidity / Dryness Sensor Calibration Fault
E12
Dryer shows E12 and may not heat or may shut down quickly; often related to condenser or heat pump models.
Condenser / Heat Exchanger Temperature Fault
E13
Dryer displays E13 and may stop with water remaining in the base tray (on some condenser/heat pump models).
Leak / Base Tray Float Switch Activation
E14
Dryer shows E14 and may not start or may stop unexpectedly; often linked to door locking on some models.
Door Locking / Safety Circuit Fault
E15
Dryer displays E15 and may not heat or may trip the household breaker.
Heater Earth Leakage / Short Circuit
E16
Dryer shows E16 and may not start; often associated with overcurrent or motor protection.
Motor Overcurrent / Overload Protection Fault
E17
Dryer displays E17 and may stop heating; sometimes associated with sensor-dry cycles only.
Exhaust Temperature Out of Range
E18
Dryer shows E18 and may not complete cycles; sometimes linked to time or program logic errors.
Program Timing / Logic Fault
Symptom
Dryer control panel buttons are unresponsive or some buttons do not work.
User Interface Button / PCB Fault
Symptom
Dryer display and lights flicker or reset during operation.
Intermittent Power or Control Supply Issue
Symptom
Dryer display works but selector knob does not change programs or jumps erratically.
Program Selector Encoder Fault
Symptom
Dryer door opens during cycle or pops open due to vibration.
Weak Door Catch / Misalignment
Symptom
Dryer door will not open at the end of the cycle; latch appears stuck.
Door Latch / Interlock Stuck Closed
Symptom
Dryer drum does not turn but you can hear the motor humming or running.
Drive Belt Slipped or Broken
Symptom
Dryer drum light (if fitted) does not work, but dryer otherwise operates normally.
Drum Lamp Failure
Symptom
Dryer emits a burning smell during operation, with or without visible smoke.
Overheating or Foreign Object on Heater
Symptom
Dryer has a musty or damp smell that transfers to clothes.
Mould or Bacteria Build-up in Air Path
Symptom
Dryer leaks water onto the floor from the front or underneath (condenser/heat pump models).
Water Leak from Condensate System
Symptom
Dryer makes a loud rumbling or thumping noise, especially with larger loads.
Drum Roller / Bearing or Felt Pad Wear
Symptom
Dryer makes loud squealing or screeching noises during operation.
Drum Support / Bearing Wear
Symptom
Dryer powers on but will not start when Start/Pause is pressed; beeps or flashes but no drum movement.
Start Inhibit / Door or Program Not Ready
Symptom
Dryer runs but does not heat; clothes remain cold and damp at the end of the cycle, no error code displayed.
No Heat Condition
Symptom
Dryer runs but overheats; exterior cabinet becomes very hot and clothes feel excessively hot or scorched.
Overheating Due to Airflow Restriction or Thermostat Failure
Symptom
Dryer runs but timer does not count down correctly; cycle seems to run indefinitely or ends too soon on timed programs.
Timer / Control Logic Fault
Symptom
Dryer stops mid-cycle and the water tank is not full, but the 'empty water' indicator is lit (no code).
False Water Tank Full Indication
Symptom
Dryer stops shortly after starting; clothes remain very wet and cool, no error code shown.
Early Cycle Termination on Sensor-Dry
Symptom
Dryer takes too long to dry clothes; loads are still damp after the normal program duration.
Poor Drying Performance / Restricted Airflow
Symptom
Dryer trips the household RCD/RCBO (earth leakage device) when started.
Earth Leakage Fault
Symptom
Dryer vibrates excessively or moves across the floor during operation.
Excessive Vibration / Imbalance
Symptom
Dryer will not start at all; no lights or display, completely dead.
No Power / Supply Fault
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Dryer will not start; display shows E01 and cycle will not begin when Start/Pause is pressed.
|
Door Interlock Circuit Fault | View Details |
| E02 |
Dryer stops shortly after starting or will not start; E02 displayed indicating a heating problem.
|
Heater Circuit Failure | View Details |
| E03 |
Dryer runs but clothes remain wet and cool; E03 displayed indicating a temperature sensing issue.
|
NTC Temperature Sensor Fault | View Details |
| E04 |
Dryer stops mid-cycle and displays E04; may be accompanied by very hot cabinet or drum.
|
Overheating / Airflow Restriction Fault | View Details |
| E05 |
Dryer will not start or stops shortly after starting; E05 displayed, often on condenser models with water tank.
|
Water Tank Full / Condensate Pump Fault | View Details |
| E06 |
Dryer drum does not rotate; motor hums or stops and E06 is displayed.
|
Drum Motor / Drive Circuit Fault | View Details |
| E07 |
Dryer stops and displays E07; may occur shortly after starting, often on condenser models.
|
Moisture Sensor / Dryness Detection Fault | View Details |
| E08 |
Dryer displays E08 and may not heat correctly; often associated with fan or airflow sensor issues.
|
Fan Motor / Airflow Monitoring Fault | View Details |
| E09 |
Dryer will not start or stops unexpectedly; E09 displayed indicating a control board or power issue.
|
Main Control PCB Power Supply Fault | View Details |
| E10 |
Dryer shows E10 and may not respond to button presses or may behave erratically.
|
User Interface / Communication Fault | View Details |
| E11 |
Dryer displays E11 and may stop heating or terminate cycles prematurely, particularly on sensor-dry programs.
|
Humidity / Dryness Sensor Calibration Fault | View Details |
| E12 |
Dryer shows E12 and may not heat or may shut down quickly; often related to condenser or heat pump models.
|
Condenser / Heat Exchanger Temperature Fault | View Details |
| E13 |
Dryer displays E13 and may stop with water remaining in the base tray (on some condenser/heat pump models).
|
Leak / Base Tray Float Switch Activation | View Details |
| E14 |
Dryer shows E14 and may not start or may stop unexpectedly; often linked to door locking on some models.
|
Door Locking / Safety Circuit Fault | View Details |
| E15 |
Dryer displays E15 and may not heat or may trip the household breaker.
|
Heater Earth Leakage / Short Circuit | View Details |
| E16 |
Dryer shows E16 and may not start; often associated with overcurrent or motor protection.
|
Motor Overcurrent / Overload Protection Fault | View Details |
| E17 |
Dryer displays E17 and may stop heating; sometimes associated with sensor-dry cycles only.
|
Exhaust Temperature Out of Range | View Details |
| E18 |
Dryer shows E18 and may not complete cycles; sometimes linked to time or program logic errors.
|
Program Timing / Logic Fault | View Details |
| – |
Dryer control panel buttons are unresponsive or some buttons do not work.
|
User Interface Button / PCB Fault | View Details |
| – |
Dryer display and lights flicker or reset during operation.
|
Intermittent Power or Control Supply Issue | View Details |
| – |
Dryer display works but selector knob does not change programs or jumps erratically.
|
Program Selector Encoder Fault | View Details |
| – |
Dryer door opens during cycle or pops open due to vibration.
|
Weak Door Catch / Misalignment | View Details |
| – |
Dryer door will not open at the end of the cycle; latch appears stuck.
|
Door Latch / Interlock Stuck Closed | View Details |
| – |
Dryer drum does not turn but you can hear the motor humming or running.
|
Drive Belt Slipped or Broken | View Details |
| – |
Dryer drum light (if fitted) does not work, but dryer otherwise operates normally.
|
Drum Lamp Failure | View Details |
| – |
Dryer emits a burning smell during operation, with or without visible smoke.
|
Overheating or Foreign Object on Heater | View Details |
| – |
Dryer has a musty or damp smell that transfers to clothes.
|
Mould or Bacteria Build-up in Air Path | View Details |
| – |
Dryer leaks water onto the floor from the front or underneath (condenser/heat pump models).
|
Water Leak from Condensate System | View Details |
| – |
Dryer makes a loud rumbling or thumping noise, especially with larger loads.
|
Drum Roller / Bearing or Felt Pad Wear | View Details |
| – |
Dryer makes loud squealing or screeching noises during operation.
|
Drum Support / Bearing Wear | View Details |
| – |
Dryer powers on but will not start when Start/Pause is pressed; beeps or flashes but no drum movement.
|
Start Inhibit / Door or Program Not Ready | View Details |
| – |
Dryer runs but does not heat; clothes remain cold and damp at the end of the cycle, no error code displayed.
|
No Heat Condition | View Details |
| – |
Dryer runs but overheats; exterior cabinet becomes very hot and clothes feel excessively hot or scorched.
|
Overheating Due to Airflow Restriction or Thermostat Failure | View Details |
| – |
Dryer runs but timer does not count down correctly; cycle seems to run indefinitely or ends too soon on timed programs.
|
Timer / Control Logic Fault | View Details |
| – |
Dryer stops mid-cycle and the water tank is not full, but the 'empty water' indicator is lit (no code).
|
False Water Tank Full Indication | View Details |
| – |
Dryer stops shortly after starting; clothes remain very wet and cool, no error code shown.
|
Early Cycle Termination on Sensor-Dry | View Details |
| – |
Dryer takes too long to dry clothes; loads are still damp after the normal program duration.
|
Poor Drying Performance / Restricted Airflow | View Details |
| – |
Dryer trips the household RCD/RCBO (earth leakage device) when started.
|
Earth Leakage Fault | View Details |
| – |
Dryer vibrates excessively or moves across the floor during operation.
|
Excessive Vibration / Imbalance | View Details |
| – |
Dryer will not start at all; no lights or display, completely dead.
|
No Power / Supply Fault | View Details |
No matching codes found
Advertisements