Belling Drum Roller / Bearing or Felt Pad Wear

Dryer makes a loud rumbling or thumping noise, especially with larger loads.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Flat-spotted drum support rollers (on roller-equipped models), Worn rear bearing, Loose drum baffles, Uneven load distribution

Safety first: Disconnect from mains before working on the dryer.

Simple checks:

Run the dryer empty. If the noise is greatly reduced, the issue may be load-related; avoid overloading and mix large and small items.

Mechanical inspection:

Remove the front panel and inspect drum support rollers or felt pads. Replace any rollers that are worn, seized, or flat-spotted.
Check the rear bearing for play and replace if worn.
Inspect drum baffles inside the drum for looseness; tighten screws or replace baffles if cracked.

Hard 4/5

Drum Support Rollers

Check Price on Amazon

We may earn a commission from links on this page.