Dryer shows E16 and may not start; often associated with overcurrent or motor protection.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Disconnect from mains before any internal inspection.
Mechanical inspection:
- Rotate the drum by hand from the door opening. Any grinding, scraping, or stiffness indicates a mechanical jam or bearing issue.
- Check for items trapped between drum and front felt seal or rear bulkhead.
- Inspect the fan housing for obstructions that could stall the motor.
Electrical inspection:
- Access the motor and check for burnt smell, discoloration, or melted insulation.
- Test motor windings with a multimeter; significantly low resistance or imbalance between windings suggests a shorted motor.
Action: Free any obstructions, replace worn bearings or motor as needed. If the motor and mechanics are sound but E16 persists, the motor control components on the main PCB may be faulty and require professional replacement.