Electrolux
Drive Belt or Motor Start Failure
Dryer drum does not turn, but motor hums or clicks when Start is pressed
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken or slipped drive belt, Seized drum roller or idler pulley, Weak motor start winding, Foreign object jamming drum
How to Fix / Troubleshooting
Safety first: Unplug the dryer before opening any panels.
- Check drum rotation: Open the door and try to spin the drum by hand. If it will not move or is very stiff, a roller, idler, or object may be jamming it.
- Inspect belt: Remove the top panel and look down at the drum. If the belt is loose, broken, or off the motor pulley, it must be replaced.
- Check rollers and idler: Remove the front panel to access the drum support rollers and idler pulley. Spin each by hand; they should turn freely and quietly. Replace any that are noisy or seized.
- Test motor: If the belt and rollers are good but the motor only hums, the motor may be failing and should be replaced.
Do not continue to run the dryer with a humming motor; this can overheat and damage the motor and wiring.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements