Gorenje Display Module / Backlight Fault

Dryer display is dim, flickering, or partially unreadable.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging or failing LED/LCD display, Loose display connector, Voltage instability from control board, Moisture damage to display

Safety first: Unplug the dryer before accessing the control panel.

Check connections: Remove the control panel and reseat the display connector.
Inspect for moisture: Look for condensation or corrosion on the display board. Dry and clean if minor.
Test operation: Reassemble and test. If the display remains dim or missing segments, the display module or entire UI board may need replacement.
Power quality: Ensure the dryer is connected to a stable power source without frequent voltage drops.

Medium 3/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.