Gorenje Drum Support / Bearing Wear

Dryer is very noisy during operation; grinding, squealing, or rumbling sounds from the drum area.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn drum rear bearing, Worn or seized drum support rollers, Damaged idler pulley, Foreign objects trapped in drum felt seals

How to Fix / Troubleshooting

Safety first: Unplug the dryer. Sharp edges and moving parts can cause injury.

  • Empty the drum: Remove all laundry and run the dryer briefly. If noise persists, it is likely mechanical.
  • Check for foreign objects: Inspect the drum seals at the front and rear for coins, bra wires, or other items stuck in the gap.
  • Access drum supports: Remove the top and front panel to expose the drum front supports and idler pulley. Spin rollers by hand; replace any that are noisy or stiff.
  • Rear bearing: On models with a rear bearing, remove the drum and inspect the bearing and support ball. Replace if worn flat or dry; lubricate only if specified by Gorenje.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Drum Support Rollers
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements