Gorenje
Start Circuit / Safety Interlock Issue
Dryer powers on but will not start a cycle when Start is pressed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty Start button or user interface, Open door switch, Child lock function enabled, Defective main control relay
How to Fix / Troubleshooting
Safety first: Unplug the dryer before accessing the control panel.
- Check display messages: Ensure no child lock or door open icons are displayed. Disable child lock according to the user manual.
- Verify door closure: Close the door firmly until you hear a click. Check that the door switch is actuated.
- Test door switch: Access the switch and test continuity while pressing it. Replace if faulty.
- Inspect Start button: Remove the control panel and check the Start button for proper mechanical action. Test with a multimeter for continuity when pressed.
- Control board: If switches are good, the main PCB may not be energizing the motor relay and may need professional diagnosis.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Switch Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements