E16
Gorenje
Power Supply / Voltage Fault
Dryer displays E16; often associated with power supply or internal voltage issues.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Unstable mains voltage, Faulty power supply section on control board, Loose mains connection block, Damaged line filter (EMI filter)
How to Fix / Troubleshooting
Safety first: Unplug the dryer. Mains voltage is dangerous; only qualified persons should work on live circuits.
- Check wall outlet: Verify that the outlet provides the correct voltage and is not loose. Avoid using long extension cords.
- Inspect mains cable: Check the power cord for cuts, burns, or kinks. Replace if damaged.
- Access terminal block: Remove the rear cover over the mains terminal block. Ensure all screws are tight and there are no signs of overheating.
- Line filter and PCB: Visually inspect the EMI filter and control board for burned components or bulging capacitors. If found, the board or filter should be replaced by a technician.
- Persistent E16: If the household supply is stable and connections are good, the internal power supply on the PCB may be faulty and require professional repair.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Module (Power Supply Section)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements