Dryer displays E08; cycle may abort shortly after start, sometimes with unusual noises from the fan area.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Disconnect power before removing rear or side panels.
Access and inspect the fan:
- On many Neff dryers, the blower is located at the rear or lower side. Remove the appropriate panel to expose the fan housing.
- Check the blower wheel for lint build-up, socks, or other obstructions. Remove any debris carefully.
- Spin the blower wheel by hand; it should rotate freely without wobble.
Fan motor checks:
- Inspect the fan motor for signs of overheating or burnt smell.
- Check the wiring harness and connector for damage or loose contacts.
- Test the motor windings for continuity according to the service manual values.
If the fan wheel is cracked or the motor is seized or open-circuit, replace the complete fan motor assembly. After reassembly, run a test cycle and listen for smooth airflow.
Repair Difficulty
Required Part
We may earn a commission from links on this page.