How to Fix / Troubleshooting

Safety first: Unplug the dryer immediately to avoid motor damage.

Step-by-step checks:

Manual rotation test: Open the door and try to rotate the drum by hand. If it is very stiff or stuck, suspect mechanical obstruction or seized supports.
Inspect for obstructions: Remove the top and front panels. Look for clothing, coins, or other objects trapped at the front felt seal or rear bulkhead.
Check belt condition: Verify the belt is intact and properly tensioned around the drum and motor pulley. Replace if broken or heavily worn.
Examine rollers/bearing: Spin drum rollers or rear bearing by hand. Replace any that are noisy, rough, or seized.
Test start capacitor: Locate the capacitor near the motor. If it is bulged or leaking, replace it with the exact Vedette-specified value.

Note: Do not continue to run the dryer with a humming motor; this can overheat and destroy the motor.

Dryer drum does not turn, but you can hear the motor humming when Start is pressed

Possible Causes