Vedette Condensate Pump Not Moving Water

Dryer stops with water remaining in the condenser area or tank does not fill

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked pump inlet, Failed condensate pump motor, Kinked or blocked drain hose, Faulty pump wiring

Safety first: Unplug the dryer and remove any standing water carefully.

Step-by-step checks:

Clean pump inlet: Access the pump compartment and remove lint or debris from the pump inlet and reservoir.
Check hoses: Ensure hoses to and from the pump are not kinked or blocked. Flush with warm water if necessary.
Test pump: With the dryer reassembled and powered, start a cycle and listen for pump operation when water should be moved. If silent, the pump may be defective and should be replaced.

Medium 3/5

Condensate Pump Assembly

Check Price on Amazon

We may earn a commission from links on this page.