Vedette
Power Supply / Main Fuse Failure
Dryer will not power on at all; no lights, no display, completely dead
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on control board, Faulty mains power cord, Defective on/off switch, Burnt track or component on main PCB
How to Fix / Troubleshooting
Safety first: Unplug the dryer and verify the wall outlet has power using another appliance or a tester.
Step-by-step checks:
- Check outlet and breaker: Ensure the circuit breaker or fuse for the dryer circuit has not tripped or blown.
- Inspect power cord: Look for cuts, burns, or kinks in the cord. Replace if damaged.
- Access control board: Remove the top cover and locate the main control board. Look for an onboard fuse (glass or ceramic). Test it with a multimeter and replace with the same rating if blown.
- Visual PCB inspection: Check for burnt components or tracks. If present, the board must be replaced.
Warning: Do not bypass fuses or safety devices; always replace with correct Vedette-specified parts.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board Fuse / Power Cord
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements