Zanussi Motor Start Failure

Zanussi dryer drum light works but the drum does not rotate and there is a humming noise.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed motor capacitor, Jammed drum, Weak motor windings, Faulty motor relay

How to Fix / Troubleshooting

Safety first: Unplug the dryer before attempting any repair. Do not repeatedly try to start a humming motor as it can overheat.

  • 1. Check drum for obstruction: Open the door and rotate the drum by hand. If it is stiff or jammed, look for trapped items between the drum and cabinet.
  • 2. Motor capacitor (condenser models): Access the motor area from the rear or side. Locate the start/run capacitor (cylindrical component). If it is bulging or leaking, replace it with the same µF rating.
  • 3. Belt and pulley: Ensure the belt is correctly routed and not overly tight. Check that the idler pulley moves freely.
  • 4. Motor test (advanced): If the capacitor is good, the motor windings may be weak or open. Test with a multimeter and replace the motor if defective.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Motor Start Capacitor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements