East Oak
Display Module Degradation
Digital display is dim, flickering, or some segments are missing, but the smoker still heats.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LED/LCD display, Loose display connector, Voltage drop from failing control board, Moisture behind display lens
How to Fix / Troubleshooting
Safety first: Unplug the smoker before removing the control panel.
Steps:
- Inspect and reseat connectors: Remove the control panel and reseat the display ribbon cable or connector on the main control board.
- Dry moisture: If condensation is present behind the display lens, allow the panel to dry thoroughly before reassembly.
Repair: If the display remains dim or segments are missing, replace the display module or the entire touch control panel assembly, depending on design.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements