East Oak
Mechanical Noise / Fan or Panel Vibration
Smoker makes loud rattling, grinding, or squealing noises during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or dry convection fan motor bearings, Loose fan blade, Loose internal panels or screws, Vibrating drip tray or racks
How to Fix / Troubleshooting
Safety first: Unplug the smoker before touching internal components.
Steps:
- Identify noise source: Run the smoker briefly with the door open (if safe) to localize the noise to the fan, element area, or cabinet panels.
- Tighten hardware: With power off, tighten all accessible screws on the fan housing, internal panels, and exterior cabinet.
- Check fan blade: Inspect the fan blade for looseness or contact with the housing. Tighten the set screw or replace the blade if damaged.
Repair: If the fan motor squeals or grinds, replace the convection fan motor assembly. Add high-temp-rated threadlocker to screws that repeatedly loosen.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements