BougeRV
No Power / Dead Unit
Charger does not power on at all; no display, no LEDs, and no relay click when power is applied.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped upstream breaker, Blown internal fuse on BougeRV charger, Failed AC input filter or power supply module, Loose line connection at input terminal block
How to Fix / Troubleshooting
High voltage hazard: Only open the charger if you are comfortable working around mains voltage. Otherwise, contact a professional.
- Step 1 – Check breaker and outlet: Verify the dedicated breaker is ON and not tripped. Test the outlet or circuit with another high-power device to confirm power is present.
- Step 2 – Inspect power cord / input wiring: For plug-in models, check the cord and plug for damage. For hardwired units, turn off the breaker and confirm all input wires are securely attached to the BougeRV input terminal block.
- Step 3 – Internal fuse: With power off and cover removed, locate any internal fuses on the power supply board. Test with a multimeter and replace only with the same type and rating.
- Step 4 – Power supply module: If fuses are intact and input voltage is present at the board but there is no low-voltage output (e.g., 5 V or 12 V), the BougeRV auxiliary power supply module is likely faulty and must be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
BougeRV Auxiliary Power Supply Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements