Charger displays E19, integrated door or cover switch error, unit refuses to charge with cover closed.

Safety first: The cover interlock prevents access to live parts. Never bypass it permanently. Isolate mains before adjusting.

• 1. Check cover alignment:
  • Ensure the front cover is properly seated and all screws are tightened.
  • Look for warped plastic or obstructions preventing full closure.
• 2. Inspect interlock switch:
  • Open the housing (with power off) and locate the cover microswitch or reed switch.
  • Verify that the actuator or magnet aligns correctly when the cover is closed.
• 3. Test switch continuity:
  • With a multimeter, check the switch contacts while manually actuating it.
  • If no change in continuity, replace the switch.
• 4. Check wiring:
  • Inspect the cable from the switch to the main board for breaks or loose connectors.
• 5. Replace faulty parts:
  • Install a new cover interlock switch if defective.
  • Never short the interlock terminals as a permanent fix.