Pod Point LED Indicator / Display Fault

Charger front LEDs are dim, flickering, or not displaying correct colors, but charging works

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed LEDs on indicator board, Loose connector between LED board and main PCB, LED driver fault, Water ingress affecting front fascia

How to Fix / Troubleshooting

Note: This is primarily a cosmetic/diagnostic issue; charging may still be safe.

  • Step 1 – Power cycle: Turn the charger OFF and ON to see if LED behavior normalizes.
  • Step 2 – Check for moisture: Look for condensation under the front fascia. If present, avoid use in heavy rain and arrange inspection.
  • Step 3 – Technician inspection: A technician can open the unit, check the ribbon cable or connector to the LED board, and reseat it.
  • Step 4 – Replace LED board: If LEDs remain faulty, replace the front LED/indicator PCB or fascia assembly as per Pod Point parts list.
  • Step 5 – Verify status via app: Use the Pod Point app for status information until the LED issue is resolved.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Front LED / Indicator PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements