Splitvolt EV charger will not power on at all; no lights or display when the breaker is turned on.

Safety first: Turn off the breaker before removing covers or checking wiring. High voltage is present inside the charger.

• Verify breaker status: Check that the 2-pole breaker feeding the Splitvolt outlet is in the ON position and not tripped. Reset if necessary.
• Test outlet: Use a multimeter or plug in another 240V appliance (if appropriate) to confirm the outlet has power. If not, contact an electrician.
• Inspect plug and cord: With power OFF, unplug the charger and inspect the cord for cuts, burns, or crushed sections. Replace the charger if the cord is damaged.
• Internal fuse (if accessible by design): Some Splitvolt models may have a serviceable internal fuse. Only a qualified technician should open the unit and test/replace this fuse.
• If still dead with known-good power: The internal power supply or control board is likely failed and the unit should be professionally repaired or replaced.