Balay
Compressor Not Running
Freezer not cooling at all, interior at room temperature, light may still work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed compressor start relay, Open compressor winding, Faulty main control board not sending power, Tripped thermal overload
How to Fix / Troubleshooting
Danger: Compressor circuits carry mains voltage. Unplug the freezer before touching anything near the compressor.
- Confirm power: Check that the outlet works and the freezer is properly plugged in. Verify that the interior light or display turns on.
- Listen for compressor: Place your hand on the compressor. If it is cold and silent after several minutes of operation, it is not starting.
- Check start device: Remove the rear lower cover and inspect the compressor start relay and overload. Look for burn marks or melted plastic.
- Replace start relay/overload: If damaged, install a new Balay compressor start relay and overload protector matched to your model.
- Test operation: Restore power and listen for the compressor starting. If it still does not run, the compressor or main PCB may be faulty.
Compressor or PCB diagnosis beyond the start device should be performed by a qualified technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Compressor Start Relay and Overload Protector
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements