Freezer will not start at all; display and light are off.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Danger: Mains voltage is present. Unplug the freezer before inspecting internal connections.
- Check outlet and breaker: Test the wall socket with another device and reset any tripped breakers or replace blown fuses.
- Inspect power cord and plug: Look for visible damage. If damaged, the Balay power cord must be replaced.
- Check mains switch: If your model has a power switch, ensure it is in the ON position and not loose or broken.
- Internal terminal block: If accessible, check that the mains wires are securely connected at the internal terminal block.
If there is still no power and the supply is good, the main control board or internal wiring may be faulty and should be checked by a technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.