Freezer is vibrating excessively and may move or rattle against surrounding cabinets.

Safety first: Ensure the power cord is not under the feet before adjusting the unit.

Level the freezer:

• Place a spirit level on the top front edge of the freezer.
• Adjust the front leveling feet until the unit is level side-to-side and slightly tilted back.

Check clearances:

• Ensure there is a small gap between the freezer and adjacent walls or cabinets.
• Move the unit slightly forward if it is touching the wall.

Stabilize:

• If the floor is uneven, use shims under the feet to prevent rocking.
• Confirm all feet are firmly in contact with the floor.

Test: Run the freezer and observe vibration. Adjust as needed until vibration is minimized.