dO
Fisher & Paykel
Door Ajar Detection Fault
Display shows dO or door open icon, alarm beeps even when door appears closed.
Advertisements
Possible Causes
Misaligned door, damaged door gasket, faulty door switch or reed sensor, weak or missing door magnet, wiring fault to door sensor
How to Fix / Troubleshooting
Safety: Disconnect power before removing door switch or trim.
Steps:
- Check alignment: Ensure the door closes squarely and fully. Adjust leveling feet so the cabinet is not twisted.
- Inspect gasket: Look for warped or torn sections of the Fisher & Paykel door gasket. Warm and reshape minor warps with a hair dryer; replace if badly damaged.
- Test door switch: Press the door switch by hand; the interior light should turn off and the alarm should stop. If not, test and replace the door switch.
- Magnet/reed systems: Confirm the door magnet is present and aligned with the reed switch in the cabinet. Replace missing magnets or faulty reed switches.
Advertisements
Repair Difficulty
Easy
2/5
Advertisements