E4
Fisher & Paykel
Accessory / Secondary Fan or Ice Maker Fault
Freezer displays E4, ice maker (if fitted) may stop working, or internal fan may behave erratically.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed ice maker module (on compatible models), failed secondary circulation fan, wiring harness fault to accessory, control board accessory driver failure
How to Fix / Troubleshooting
Safety: Unplug the freezer before servicing accessories.
Steps:
- Identify accessory: Refer to the user manual to confirm whether E4 on your model refers to the ice maker or a secondary fan.
- Ice maker models: Check the ice maker power connector, water line, and module for ice jams. Clear any obstructions and reset the ice maker. If still inoperative, replace the ice maker assembly.
- Secondary fan models: Access the fan (often in a duct or behind a panel) and check for obstructions or ice. Test the fan motor for continuity and replace if open.
- Wiring and board: Inspect harnesses and connectors. If the accessory and wiring are good, the main control board may be at fault.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Maker Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements