Galanz
Compressor Start Failure
Freezer interior fan runs, but compressor does not start; clicking sound heard periodically from compressor area.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed start relay/PTC, Open overload protector, Locked rotor compressor, Low supply voltage
How to Fix / Troubleshooting
Safety: Unplug the freezer before accessing the compressor and start components. High voltage is present.
- Check supply voltage: Ensure the outlet provides correct voltage (typically 120V in North America). Low voltage can prevent compressor start.
- Inspect start device: Remove the plastic cover on the compressor terminals. Inspect the start relay/PTC and overload for burn marks or rattling pieces.
- Replace start components: If the relay/PTC is suspect, replace it and the overload with compatible Galanz compressor start components.
- Test run: Reassemble and plug in. If the compressor still clicks and fails to start, the compressor may be locked and require professional replacement.
- Do not bypass: Never bypass the overload or relay; this can cause fire or compressor damage.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Compressor Start Relay / PTC
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements