Freezer not cooling at all; interior is room temperature, compressor not running, and display (if present) may be off.

Safety: Do not attempt internal electrical repairs unless you are qualified. Always unplug the freezer before inspecting the cord or internal components.

• Check household power: Plug a lamp or small appliance into the same outlet to confirm it has power. Reset any tripped breakers or replace blown fuses in your home panel.
• Inspect the power cord: Look for cuts, crushed sections, or burn marks along the Galanz freezer's cord and plug. If damaged, the cord must be replaced; do not tape over damage.
• Verify power switch/control: Some models have a power button or control lock. Ensure the unit is switched on and not in demo mode.
• Internal fuse or board: If the outlet and cord are good but the unit is completely dead, an internal fuse or the main control board may have failed. Accessing and replacing these components typically requires removing the rear or top service panel and should be done by a technician.
• Do not bypass safety devices: Never bypass fuses or safety components; this can create a fire or shock hazard.