GE freezer display shows PF or Power Fail and may beep after an outage

Safety: Use caution when working around electrical outlets. If you are unsure about electrical testing, contact an electrician.

Steps to address PF:

• Acknowledge alarm: Press the alarm reset or set button to clear the PF message. This is usually informational.
• Check power cord: Ensure the freezer's power cord is fully inserted into the wall outlet and not damaged or pinched.
• Test outlet: Plug in another appliance or use a receptacle tester to verify the outlet is supplying stable power. Avoid using extension cords.
• Inspect circuit breaker: Check your home's breaker panel for a tripped breaker and reset if necessary.
• Monitor for recurrence: If PF appears repeatedly without known outages, there may be intermittent power loss or a loose connection at the control board. Unplug the freezer, access the main control, and verify all harness connectors are secure.

When to seek help: If PF continues and other appliances on the same circuit are unaffected, the freezer's internal wiring or control board may be faulty and should be inspected by a technician.