Freezer door will not stay closed or pops open slightly

Safety: Have assistance when adjusting door hinges to prevent dropping the door.

Steps to keep door closed:

• Level the cabinet: Adjust front leveling legs so the freezer tilts slightly backward. This helps the door swing closed and stay shut.
• Inspect gasket: Look for sections of the GE door gasket that are not contacting the cabinet. Use a hair dryer on low to gently warm and reshape the gasket, pulling it outward where needed.
• Check hinges: Tighten hinge screws at the top and bottom of the door. Adjust the door position so it is square with the cabinet.
• Remove obstructions: Ensure interior shelves or baskets are not pushing against the door from inside.
• Replace gasket if needed: If the gasket is torn or permanently deformed, replace it with a GE-compatible gasket for your model.

Note: After gasket replacement, it may take a day or two for the gasket to fully conform and seal properly.