Gorenje
No Power to Control System
Display is completely dead; no lights or indicators, but outlet has power.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Internal fuse on main PCB blown, Faulty power supply section on PCB, Loose mains connector, Defective power cord
How to Fix / Troubleshooting
Safety: Unplug the freezer before opening the electronics compartment. Capacitors may retain charge; avoid touching components unnecessarily.
- Verify outlet and cord: Test the outlet with another device and inspect the cord.
- Access PCB: Remove the control housing cover and locate any replaceable fuses on the board.
- Check fuse: Test continuity of the fuse. Replace only with the same type and rating if blown, and investigate why it failed (surge, short).
- Inspect PCB: Look for burnt components or cracked solder joints. If the power supply section is damaged, replace the main control board.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board (PCB)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements