Display shows F2; interior light may flicker or not work; other functions may be normal.

Safety: Unplug the freezer before working on lighting components.

Check the LED module:

• Locate the interior LED light assembly, usually on the ceiling or side wall.
• Inspect for visible damage, moisture, or discoloration.
• Gently tap the light housing; intermittent operation suggests a failing module or loose connection.

Inspect wiring:

• Remove the light cover and check the wiring connector. Reseat it firmly.
• Trace the harness back toward the control board if accessible, looking for pinched or damaged wires.

Replace components as needed:

• If the LED module does not light with confirmed power, replace it with an Igloo-compatible LED light assembly.
• If multiple lights or other low-voltage features fail together, the control board's driver circuit may be defective and require board replacement.

Test: Restore power and confirm that the light operates normally and the F2 indication clears.