Igloo Compressor Locked or Start Device Failure After Transport

Freezer will not start after being transported or moved; only a clicking sound is heard.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Oil migration inside compressor from improper transport, Start relay damaged, Unit plugged in immediately after moving

How to Fix / Troubleshooting

Safety: Unplug the freezer before accessing the compressor area.

Allow oil to settle:

  • If the freezer was transported on its side, leave it upright and unplugged for at least 12–24 hours before attempting to start.

Check start device:

  • Inspect and test the compressor start relay and overload as described earlier. Replace with Igloo-compatible parts if defective.

Test operation:

  • After settling time and start device replacement, plug in the freezer and listen for the compressor to start smoothly.

Professional help: If the compressor still only clicks and does not start, it may be mechanically locked and require replacement by a technician.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Compressor Start Relay
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements