Ignis No Power to Control / Dead Display

Control panel display is blank; freezer appears dead, but outlet has power.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown internal fuse on control board, Faulty power supply section, Loose wiring to control, Failed main control board

Safety first: Unplug the freezer before opening any electrical enclosures.

Confirm outlet: Test with another appliance to ensure power is present.
Inspect terminal block and wiring: Check for loose or burnt connections where the mains enters the freezer.
Check control board fuse: Some Ignis boards have a small fuse; replace only with the same rating if blown.

If the display remains dead, the main control board likely needs replacement by a technician.

Hard 4/5

Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.