Ignis
Excessive Frost Build-up
Freezer interior full of frost and ice on walls and baskets; door difficult to close.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Door gasket leaking, Door frequently left open, Failed defrost system, Blocked drain causing ice accumulation
How to Fix / Troubleshooting
Safety first: Unplug the freezer and protect the floor from water.
- Manual defrost: Remove food, leave the door open, and allow all ice to melt. Use towels to absorb water. Do not use sharp tools.
- Inspect door gasket: Close the door on a sheet of paper at several points; if it pulls out easily, the gasket is not sealing. Replace the door gasket if torn or deformed.
- Check defrost system: On frost-free Ignis models, inspect the defrost heater, thermostat, and drain as described in defrost-related entries.
Persistent heavy frost after gasket replacement suggests a defrost system fault that may need professional diagnosis.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements