Ignis
No Cooling – Compressor Not Running
Freezer not cooling at all; interior light works but compressor is silent.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective thermostat or temperature control, Failed compressor start relay, Open overload protector, Faulty main control board
How to Fix / Troubleshooting
Safety first: Unplug the freezer before accessing electrical components.
- Verify power: Confirm the outlet has power and the plug is fully inserted. Check the household breaker.
- Check control setting: Ensure the thermostat is not set to OFF or minimum. Turn it to a colder setting and listen for a click.
- Inspect compressor start device: Remove the rear panel and compressor terminal cover. Check the start relay and overload for burns or rattling. Replace if suspect.
- Bypass thermostat (test only): On mechanical models, temporarily join the two thermostat wires. If the compressor starts, replace the thermostat.
If the compressor still does not run, the main control board or compressor may be faulty; contact a professional.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Compressor Start Relay and Overload Protector
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements